ATV320U22N4C Variable speed drive, Altivar Machine ATV320, 2.2 kW, 380…500 V, 3 phases, compact

Description

range of product Altivar Machine ATV320
product or component type Variable speed drive
product specific application Complex machines
variant Standard version
With disconnect switch
format of the drive Compact
mounting mode Wall mount
communication port protocol Modbus serial
CANopen
option card Communication module, CANopen
Communication module, EtherCAT
Communication module, Profibus DP V1
Communication module, PROFINET
Communication module, Ethernet Powerlink
Communication module, EtherNet/IP
Communication module, DeviceNet
[Us] rated supply voltage 380…500 V – 15…10 %
nominal output current 5.5 A
motor power kW 2.2 kW for heavy duty
EMC filter Class C2 EMC filter integrated
IP degree of protection IP20
Complementary
discrete input number 7
discrete input type STO safe torque off, 24 V DC, impedance: 1.5 kOhm
DI1…DI6 logic inputs, 24 V DC (30 V)
DI5 programmable as pulse input: 0…30 kHz, 24 V DC (30 V)
discrete input logic Positive logic (source)
Negative logic (sink)
discrete output number 3
discrete output type Open collector DQ+ 0…1 kHz 30 V DC 100 mA
Open collector DQ- 0…1 kHz 30 V DC 100 mA
analogue input number 3
analogue input type AI1 voltage: 0…10 V DC, impedance: 30 kOhm, resolution 10 bits
AI2 bipolar differential voltage: +/- 10 V DC, impedance: 30 kOhm, resolution 10 bits
AI3 current: 0…20 mA (or 4-20 mA, x-20 mA, 20-x mA or other patterns by configuration), impedance: 250 Ohm, resolution 10 bits
analogue output number 1
analogue output type Software-configurable current AQ1: 0…20 mA impedance 800 Ohm, resolution 10 bits
Software-configurable voltage AQ1: 0…10 V DC impedance 470 Ohm, resolution 10 bits
relay output type Configurable relay logic R1A 1 NO electrical durability 100000 cycles
Configurable relay logic R1B 1 NC electrical durability 100000 cycles
Configurable relay logic R1C
Configurable relay logic R2A 1 NO electrical durability 100000 cycles
Configurable relay logic R2C
maximum switching current Relay output R1A, R1B, R1C on resistive load, cos phi = 1: 3 A at 250 V AC
Relay output R1A, R1B, R1C on resistive load, cos phi = 1: 3 A at 30 V DC
Relay output R1A, R1B, R1C, R2A, R2C on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC
Relay output R1A, R1B, R1C, R2A, R2C on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC
Relay output R2A, R2C on resistive load, cos phi = 1: 5 A at 250 V AC
Relay output R2A, R2C on resistive load, cos phi = 1: 5 A at 30 V DC
minimum switching current Relay output R1A, R1B, R1C, R2A, R2C: 5 mA at 24 V DC
method of access Slave CANopen
4 quadrant operation possible True
asynchronous motor control profile Voltage/frequency ratio, 5 points
Flux vector control without sensor, standard
Voltage/frequency ratio – Energy Saving, quadratic U/f
Flux vector control without sensor – Energy Saving
Voltage/frequency ratio, 2 points
synchronous motor control profile Vector control without sensor
maximum output frequency 0.599 kHz
transient overtorque 170…200 % of nominal motor torque
acceleration and deceleration ramps Linear
U
S
CUS
Ramp switching
Acceleration/deceleration ramp adaptation
Acceleration/deceleration automatic stop with DC injection
motor slip compensation Automatic whatever the load
Adjustable 0…300 %
Not available in voltage/frequency ratio (2 or 5 points)
switching frequency 2…16 kHz adjustable
4…16 kHz with derating factor
nominal switching frequency 4 kHz
braking to standstill By DC injection
brake chopper integrated True
line current 8.7 A at 380 V (heavy duty)
6.6 A at 500 V (heavy duty)
maximum input current 8.7 A
maximum output voltage 500 V
apparent power 5.7 kVA at 500 V (heavy duty)
network frequency 50…60 Hz
relative symmetric network frequency tolerance 5 %
prospective line Isc 5 kA
base load current at high overload 8.0 A
power dissipation in W Fan: 74.0 W at 380 V, switching frequency 4 kHz
with safety function Safely Limited Speed (SLS) True
with safety function Safe brake management (SBC/SBT) False
with safety function Safe Operating Stop (SOS) False
with safety function Safe Position (SP) False
with safety function Safe programmable logic False
with safety function Safe Speed Monitor (SSM) False
with safety function Safe Stop 1 (SS1) True
with sft fct Safe Stop 2 (SS2) False
with safety function Safe torque off (STO) True
with safety function Safely Limited Position (SLP) False
with safety function Safe Direction (SDI) False
protection type Input phase breaks: drive
Overcurrent between output phases and earth: drive
Overheating protection: drive
Short-circuit between motor phases: drive
Thermal protection: drive
width 140 mm
height 184.0 mm
depth 158.0 mm
net weight 2.1 kg

Reviews

There are no reviews yet.


Be the first to review “ATV320U22N4C Variable speed drive, Altivar Machine ATV320, 2.2 kW, 380…500 V, 3 phases, compact”

has been added to your cart:
Checkout