ATV310HU15N4E variable speed drive ATV310, 1.5 kW, 2 hp, 380…460 V, 3 phase, without filter
Original price was: ₹29627.₹11850Current price is: ₹11850.
HSN CODE: 85044090
- Description
- Reviews (0)
Description
range of product | Easy Altivar 310 |
---|---|
product or component type | Variable speed drive |
product specific application | Simple machine |
assembly style | With heat sink |
device short name | ATV310 |
network number of phases | Three phase |
[Us] rated supply voltage | 380…460 V – 15…10 % |
motor power kW | 1.5 kW |
motor power hp | 2 hp |
noise level | 50 dB |
product destination | Asynchronous motors |
---|---|
Quantity per set | Set of 1 |
EMC filter | Without EMC filter |
type of cooling | Integrated fan |
supply frequency | 50/60 Hz +/- 5 % |
communication port protocol | Modbus |
connector type | RJ45 (on front face) for Modbus |
physical interface | 2-wire RS 485 for Modbus |
transmission frame | RTU for Modbus |
transmission rate | 4800 bit/s 9600 bit/s 19200 bit/s 38400 bit/s |
number of addresses | 1…247 for Modbus |
communication service | Read holding registers (03) 29 words Write single register (06) 29 words Write multiple registers (16) 27 words Read/write multiple registers (23) 4/4 words Read device identification (43) |
line current | 5.4 A 54.1 A |
apparent power | 4.3 kVA 35.7 kVA |
prospective line Isc | 5 kA 5 kA |
continuous output current | 4.1 A at 4 kHz 43 A at 4 kHz |
maximum transient current | 6.2 A for 60 s 47.3 A for 60 s |
power dissipation in W | 51.82 W at In 588 W at In |
speed drive output frequency | 0.5…400 Hz |
nominal switching frequency | 4 kHz |
switching frequency | 2…12 kHz adjustable |
speed range | 1…20 |
transient overtorque | 170…200 % of nominal motor torque depending on drive rating and type of motor |
braking torque | Up to 150 % of nominal motor torque with braking resistor at high inertia Up to 70 % of nominal motor torque without braking resistor |
asynchronous motor control profile | Energy saving ratio Energy saving ratio Sensorless flux vector control |
motor slip compensation | Adjustable Adjustable |
output voltage | 380…460 V three phase |
electrical connection | Terminal, clamping capacity: 1.5…2.5 mm² (L1, L2, L3, PA/+, PB, U, V, W) |
tightening torque | 0.8…1 N.m |
insulation | Electrical between power and control |
supply | Internal supply for reference potentiometer: 5 V (4.75…5.25 V)DC, <10 mA with overload and short-circuit protection Internal supply for logic inputs: 24 V (20.4…28.8 V)DC, <100 mA with overload and short-circuit protection |
analogue input number | 1 |
analogue input type | Configurable current AI1 0…20 mA 250 Ohm Configurable voltage AI1 0…10 V 30 kOhm Configurable voltage AI1 0…5 V 30 kOhm |
discrete input number | 4 |
discrete input type | Programmable LI1…LI4 24 V 18…30 V |
discrete input logic | Negative logic (sink), > 16 V (state 0), < 10 V (state 1), input impedance 3.5 kOhm Positive logic (source), 0…< 5 V (state 0), > 11 V (state 1) |
sampling duration | 10 ms for analogue input 20 ms, tolerance +/- 1 ms for logic input |
linearity error | +/- 0.3 % of maximum value for analogue input |
analogue output number | 1 |
analogue output type | AO1 software-configurable voltage: 0…10 V, impedance: 470 Ohm, resolution 8 bits AO1 software-configurable current: 0…20 mA, impedance: 800 Ohm, resolution 8 bits |
discrete output number | 2 |
discrete output type | Logic output LO+, LO- Protected relay output R1A, R1B, R1C 1 C/O |
minimum switching current | 5 mA at 24 V DC for logic relay |
maximum switching current | 2 A at 250 V AC on inductive load cos phi = 0.4 L/R = 7 ms for logic relay 2 A at 30 V DC on inductive load cos phi = 0.4 L/R = 7 ms for logic relay 3 A at 250 V AC on resistive load cos phi = 1 L/R = 0 ms for logic relay 4 A at 30 V DC on resistive load cos phi = 1 L/R = 0 ms for logic relay |
acceleration and deceleration ramps | U S Linear from 0…999.9 s |
braking to standstill | By DC injection, <30 s |
protection type | Line supply overvoltage Line supply undervoltage Overcurrent between output phases and earth Overheating protection Short-circuit between motor phases Against input phase loss in three-phase Thermal motor protection via the drive by continuous calculation of I²t |
frequency resolution | Analog input: converter A/D, 10 bits Display unit: 0.1 Hz |
time constant | 20 ms +/- 1 ms for reference change |
operating position | Vertical +/- 10 degree |
height | 151 mm |
width | 105 mm |
depth | 143 mm |
net weight | 1.1 kg |
Reviews
There are no reviews yet.